Thickness — 5.4 mm vs 3 mm
LR44 is 5.4 mm thick; LR1130 is 3 mm. Holders are built for one stack height. The thinner cell loses spring pressure (“works only when I press the cover”). The thicker cell jams the door or bends the clip.
LR44 vs LR1130
LR44 (AG13/A76) and LR1130 (AG10/L1131) share an ~11.6 mm diameter and 1.5V alkaline chemistry, but LR44 is 5.4 mm thick while LR1130 is only ~3.0 mm. Mixing them up is one of the most common button-cell shopping errors.
Last verified Aug 25, 2026
Not interchangeable — match thickness as well as diameter.
A LR1130 vs LR44 swap fails on thickness, capacity. If the door only closes when you force it, or the device works only while you press the cover, you have the wrong cell — not a weak spring you should ignore.
They share 1.5 V and Alkaline and 11.6 mm diameter, which is why LR44 vs LR1130 looks interchangeable on a store shelf. Highlighted rows are the ones that change the purchase: thickness, capacity.
Read physical fit before capacity. Extra milliamp-hours only help when the holder is built for that cell. A “better” spec in the wrong tray is a mechanical or voltage mismatch, not an upgrade.
If you searched LR1130 vs LR44, you are on the same comparison with the names reversed. The difference between LR44 and LR1130 batteries is not the word “vs” — it is the specs that do not match after you ignore the similar photos.
LR44 is 5.4 mm thick; LR1130 is 3 mm. Holders are built for one stack height. The thinner cell loses spring pressure (“works only when I press the cover”). The thicker cell jams the door or bends the clip.
Typical LR44 capacity is 110–130 mAh. LR1130 is 70–80 mAh. Runtime only follows that gap inside the correct holder. Extra capacity in the wrong tray does not last longer — it often does not run at all.
Shared ~11.6 mm diameter and 1.5V alkaline class
Retail labels: AG13/A76 vs AG10/L1131
Silver oxide upgrades: 357/SR44 vs 389/390/SR1130SW
Coin and button codes are rulers, not brand slogans. The letters mark chemistry class. The digits encode size. LR44 measures 11.6 × 5.4 mm; LR1130 measures 11.6 × 3 mm. Once you read the code that way, LR1130 vs LR44 stops looking like a preference and starts looking like a fit check.
Usually no. LR44 is 11.6 × 5.4 mm at 1.5 V (Alkaline). LR1130 is 11.6 × 3 mm at 1.5 V (Alkaline). Those are not the same part.
If the spent cell or tray said LR1130, specify that code. Forcing LR44 can crack a cover, lose contact, or apply the wrong voltage.
Usually no. Going the other way does not fix a diameter, thickness, or voltage miss. LR1130 in a LR44 holder has the same problem with the names flipped.
If you arrived from a LR1130 vs LR44 search, stay on this page. The answer does not change.
Retail packs hide the IEC size behind house codes. LR44 also appears as AG13, A76, LR1154. LR1130. Those prefixes do not change the outline unless the chemistry letters change (BR, LIR, ML, PR).
You do not need a full datasheet to settle LR44 vs LR1130. You need the stamp, the tray, or a cheap pair of calipers. A store bin labeled only “button cell” or “3V lithium” will not do that work for you.
A thin LR1130 in an LR44 holder usually loses spring contact. A thick LR44 will not close in an LR1130 door. Do not confuse either with 3V CR1130 lithium cells.
Do not stack cells, grind a can, or use foil as a permanent spacer to fake LR1130 with LR44. Read the stamp, then the spec table. If the door will not close without force, you have the wrong height or diameter.
No. Same diameter family, different thickness. LR44 is 5.4 mm; LR1130 is about 3.0 mm.
Probably not. AG10 maps to LR1130 (thin); AG13 maps to LR44 (thick). Check the number after AG.
LR44 → SR44/357. LR1130 → SR1130SW/389/390. Upgrade within the same thickness class.
Yes. LR44 vs LR1130 and LR1130 vs LR44 are the same pair. Fit, voltage, and chemistry do not change when you flip the order.
Use this guide as a starting point, then confirm voltage, chemistry, and physical size with your device manual or the marking on the old cell.
Reviewed by PlainBattery Technical Review Desk on 2026-08-25. Checked: both model identities and dimensions, voltage and chemistry differences, physical fit, interchangeability conclusion and safety warnings.
Revision record: source citations and field-level review scope added September 11, 2026. See our sources and methodology and corrections policy.