Thickness — 3.1 mm vs 5.4 mm
L1131 is 3.1 mm thick; LR44 is 5.4 mm. Holders are built for one stack height. The thinner cell loses spring pressure (“works only when I press the cover”). The thicker cell jams the door or bends the clip.
L1131 vs LR44
Same ~11.6 mm diameter, but LR44 is 5.4 mm thick while L1131/LR1130 is about 3 mm. A classic calculator/thermometer ordering mistake.
Last verified Aug 25, 2026
Not interchangeable.
A LR44 vs L1131 swap fails on thickness, capacity. If the door only closes when you force it, or the device works only while you press the cover, you have the wrong cell — not a weak spring you should ignore.
They share 1.5 V and Alkaline and 11.6 mm diameter, which is why L1131 vs LR44 looks interchangeable on a store shelf. Highlighted rows are the ones that change the purchase: thickness, capacity.
Read physical fit before capacity. Extra milliamp-hours only help when the holder is built for that cell. A “better” spec in the wrong tray is a mechanical or voltage mismatch, not an upgrade.
If you searched LR44 vs L1131, you are on the same comparison with the names reversed. The difference between L1131 and LR44 batteries is not the word “vs” — it is the specs that do not match after you ignore the similar photos.
L1131 is 3.1 mm thick; LR44 is 5.4 mm. Holders are built for one stack height. The thinner cell loses spring pressure (“works only when I press the cover”). The thicker cell jams the door or bends the clip.
Typical L1131 capacity is 70–80 mAh. LR44 is 110–130 mAh. Runtime only follows that gap inside the correct holder. Extra capacity in the wrong tray does not last longer — it often does not run at all.
Shared diameter ~11.6 mm
Height ~3 mm vs 5.4 mm
Coin and button codes are rulers, not brand slogans. The letters mark chemistry class. The digits encode size. L1131 measures 11.6 × 3.1 mm; LR44 measures 11.6 × 5.4 mm. Once you read the code that way, LR44 vs L1131 stops looking like a preference and starts looking like a fit check.
Usually no. L1131 is 11.6 × 3.1 mm at 1.5 V (Alkaline). LR44 is 11.6 × 5.4 mm at 1.5 V (Alkaline). Those are not the same part.
If the spent cell or tray said LR44, specify that code. Forcing L1131 can crack a cover, lose contact, or apply the wrong voltage.
Usually no. Going the other way does not fix a diameter, thickness, or voltage miss. LR44 in a L1131 holder has the same problem with the names flipped.
If you arrived from a LR44 vs L1131 search, stay on this page. The answer does not change.
Retail packs hide the IEC size behind house codes. L1131 also appears as LR1131, SG10. LR44 also appears as AG13, A76, LR1154. Those prefixes do not change the outline unless the chemistry letters change (BR, LIR, ML, PR).
You do not need a full datasheet to settle L1131 vs LR44. You need the stamp, the tray, or a cheap pair of calipers. A store bin labeled only “button cell” or “3V lithium” will not do that work for you.
If the battery cover will not sit flush, you probably bought LR44 for an L1131 tray.
Do not stack cells, grind a can, or use foil as a permanent spacer to fake LR44 with L1131. Read the stamp, then the spec table. If the door will not close without force, you have the wrong height or diameter.
Same diameter family. Thickness is the specification that actually matters here.
Yes. L1131 vs LR44 and LR44 vs L1131 are the same pair. Fit, voltage, and chemistry do not change when you flip the order.
Use this guide as a starting point, then confirm voltage, chemistry, and physical size with your device manual or the marking on the old cell.
Reviewed by PlainBattery Technical Review Desk on 2026-08-25. Checked: both model identities and dimensions, voltage and chemistry differences, physical fit, interchangeability conclusion and safety warnings.
Revision record: source citations and field-level review scope added September 11, 2026. See our sources and methodology and corrections policy.