Lithium Coin Cells (3V) reference
CR2430
Battery equivalent chart, replacements, and specs
CR2430 aliases and equivalent names
Common search labels and closely related markings include DL2430, ECR2430. Packaging conventions vary, so confirm the compatibility grade, voltage, chemistry, and dimensions shown below before replacing the battery.
Voltage
3 V
Chemistry
LiMnO2
Capacity
280–320 mAh
Size
24.5×3 mm
CR243024.5 × 3 mm
Exact equivalents
Exact- DL2430 — Duracell
- ECR2430 — Energizer
Do not use
Not CompatibleTechnical data
Specifications
| Specification | Value |
|---|---|
| IEC / Common Code | CR2430 |
| Chemistry | LiMnO2 |
| Nominal Voltage | 3 V |
| Capacity | 280–320 mAh |
| Cutoff Voltage | ~2 V |
| Dimensions (D × H) | 24.5 × 3 mm |
Typical applications
- Car remotes
- Garage transmitters
- Small medical devices
- Memory backup modules
Applications
Replacement Compatibility
Side-by-side comparisons
Frequently Asked Questions
CR2430 vs CR2450 — which do I need?
Check your device label or measure the old cell. CR2430 is 3.0mm thick; CR2450 is 5.0mm thick. Using the wrong thickness causes power failures.
Should I always trust cross-reference charts?
Use this guide as a starting point, then confirm with your device manual or manufacturer. Voltage, chemistry, and physical fit must all match for safe operation.
Related Batteries
Review record and primary sources
Reviewed by PlainBattery Technical Review Desk on 2026-08-25. Checked: model and alias mapping, nominal voltage and chemistry, physical dimensions, capacity range and replacement warnings.
- Lithium Technical Handbook: CR Coin-Type Batteries — Panasonic Energy, 2020 handbook (2020). CR/BR dimensions, nominal voltage, capacity, discharge and temperature characteristics.
Revision record: source citations and field-level review scope added September 11, 2026. See our sources and methodology and corrections policy.
Selection notes
Do not substitute CR2450 unless the compartment has extra depth and spring travel for a 5.0mm cell.
Last verified Aug 25, 2026. Always confirm voltage, chemistry, and dimensions with the device manufacturer before replacing any battery.